Thermal Materials

>>RFQ

  • Ceramic heat spreaders
  • Conductive elastomer
  • Conductive non-woven fabric
  • Conductive PE
  • EMI absorbing materials
  • FAM (Flexible Absorbent Materials)
  • Ferrites
  • FoF (Fabric over Foam EMI gasket)
  • High thermal conductivity graphite film
  • Phase change sheet
  • Silicone sheets
  • Thermal conductivity graphite
  • Thermal gels
  • Thermal grease
  • Thermal pads
  • Thermally conductive double-sided tape
  • Thermally conductive encapsulating & potting compound
  • Thermally conductive insulators
  • Thermally conductive plastics
  • Thermal interface materials
  • XYZ Axiz conductive cushion
Thermal Materials

Leading the industry, SJS Products, a Jamcor Corporation is your dedicated partner for all thermal materials including Thermal Interface Materials, Thermal Pads, Thermal Gels, Flexible Absorbent Materials and Ceramic Heat Spreaders.

Thermal Interface Materials (TIM)
TIMs are thermally conductive materials which are applied to increase thermal contact conductance across jointed solid surfaces, such as between microprocessors and heatsinks, in order to increase thermal transfer efficiency. These gaps are normally filled with air...which is a very poor conductor.

TIMs take many forms. The most common is the white-colored paste or thermal grease which is typically silicone oil filled with aluminum oxide, zinc oxide or boron nitride. Some brands of thermal interfaces use micronized or pulverized silver.

Another type of TIMs fall under the category of phase-change materials. These are solid at room temperature but liquefy and behave like grease at operating temperatures. A major advantage of phase-change materials are their ease in handling and no-mess application.

Thermal Pads
Having excellent thermal conductivity, ultra soft, highly compressible and easy to assemble, Thermal Pads are naturally tacky and have high dielectric breakdown voltage. Ask about SJS Products, a Jamcor Corporation's options to pre-cut and apply adhesive for you!

Thermal Gel
SJS Products, a Jamcor Corporation offers Thermal Gels with excellent thermal conductivity as well as water-proof and epoxy base gels. Drying quickly, with low viscosity and high stability, Thermal Gel is a great solution to use in electronic packaging.

Flexible Absorbent Materials (FAM)
FAMs can provide effective EMI suppression, prevent resonance and suppress coupling. SJS Products, a Jamcor Corporation's FAMs are extremely thin and flexible. FAM has high surface resistance and is compatible with high insulating thermal tapes.

Thermal Tapes
Multi-purpose with high viscosity, SJS Products, a Jamcor Corporation introduces our highly thermal conductive tapes. With customizable shapes and sizes upon request, Thermal Tapes can fill the uneven gaps between metals. Ask about our acrylic base, silicone base and fiberglass mesh thermal tapes.

Ceramic Heat Spreaders
Lightweight with high surface resistance, SJS Products, a Jamcor Corporation's Ceramic Heat Spreaders are easy to be assemble. Ceramic Heat Spreaders allow for the contact area for heat dissipation to be effectively increased. They have high thermal conductivity with high dielectric breakdown voltage.